Made and counted by Wren —

Ribbed texture crochet panel pattern for an 8 x 8 inch square

5 mm hook, medium weight #4 yarn — two ribbed panels crochet into an 8 x 8 inch textured square.

IntermediateLevel

4-6 hoursTime

5 mmHook

Worsted (Medium #4)Yarn

Jump to the pattern

About this pattern

Two 8 x 8 inch panels, each worked flat in rows from a 33-chain foundation, combine single crochet and double crochet with one back-loop-only row to form a ribbed texture. A 5 mm hook (US H-8) and about 220 yards of medium weight #4 yarn complete both panels, which are seamed, bordered with a single crochet edge, and blocked during finishing. Skill level sits between confident beginner and intermediate, and the pattern suits cotton or cotton-blend yarn for durability.

This textured panel pattern builds an 8 x 8 inch square from two matching panels worked flat in rows, joined during finishing. Each panel starts with a 33-chain foundation row and alternates single crochet and double crochet rows, with one row worked into the back loops only to raise the ribbed texture. The 5 mm hook (US H-8) and medium weight #4 yarn keep the fabric dense enough to hold its shape after blocking. The 32-stitch count carries through every row, so a shift there signals a missed or added stitch.

The pattern

Written out round by round

Materials

Medium weight #4 yarn, approximately 220 yards (200 meters)
5 mm crochet hook (US H-8)
Yarn needle
Scissors
Stitch markers
Optional blocking mat and pins

Abbreviations

ch = chain
sc = single crochet
dc = double crochet
sl st = slip stitch
st = stitch
sk = skip
blo = back loop only

Main Pattern

Foundation RowCh 33.

Row 1Sc in second ch from hook and across. Turn. (32 sts)

Row 2Ch 2, dc in each st across. Turn. (32 sts)

Row 3Ch 1, sc in each st across. Turn. (32 sts)

Row 4Ch 2, dc in each st across. Turn. (32 sts)

Row 5Ch 1, sc in blo of each st across. Turn. (32 sts)

Row 6Ch 2, dc in each st across. Turn. (32 sts)

Repeat Rows 3-6Repeat this sequence 12 more times until the panel measures approximately 8 inches (20 cm).Fasten off and weave in ends.

Special Stitch

Textured Stitch: Work one row of single crochet followed by one row of alternating double crochet stitches worked into the back loops. This creates a subtle ribbed texture.

Second Panel

Repeat the same instructions to create a matching second panel.

Assembly

Step 1Place both panels together with the textured sides facing outward.

Step 2Join yarn at one corner.

Step 3Single crochet through both layers along the sides and bottom edge.

Step 4Leave the top edge open if creating a pouch-style accessory.

Step 5Fasten off and weave in all remaining ends.

Border FinishingAttach yarn to the top corner and work one round of single crochet evenly around the edge. Join with a slip stitch and fasten off.

Step 7After completing the crochet piece, gently wash according to the yarn label instructions. Shape the panels on a flat surface and allow them to dry completely. Blocking helps define the textured stitches and creates a professional handmade finish.

Step 8Store handmade crochet pieces in a dry place and avoid stretching the fabric when handling. Cotton and cotton-blend yarns are especially suitable for projects that need durability and easy care.

Tester's notes

5 mm (US H-8) is the hook size given for medium weight #4 yarn; sizing down to 4.5 mm tightens the ribbing and uses slightly more yarn.

32 stitches must stay constant across Rows 1-4; place a stitch marker at the first and last stitch of Row 1 to catch drift early.

Row 5 and other back-loop-only rows leave a visible ridge on the front; work these rows with consistent tension or the ridge will vary panel to panel.

220 yards covers both the Main Pattern panel and the Second Panel at the stated 8 x 8 inch size; weigh remaining yarn before starting panel two.

No color changes appear in this pattern; a single skein handles both panels, so dye lot matching is not a concern.

Use soft pastel yarn for a delicate handmade style, or choose cotton yarn for a more structured finish; embroidery details or larger panels (for a pillow cover or small blanket accent) are easy ways to customize the design.

Textured stitches often appear smaller after washing; blocking the finished panels helps even out stitches and improves the final shape.

This pattern uses US crochet terminology.

At a glance

Rounds	8
Parts	3
Level	Intermediate
Time	4-6 hours
Hook	5 mm
Yarn	Worsted (Medium #4)

Gauge check

Gauge: 16 stitches x 14 rows = 4 inches (10 cm) in the textured pattern.

After Row 1, count the 32 stitches across the foundation row and measure its width; adjust hook size up or down until that width matches the yarn label's gauge before continuing.

If the stitch count drifts from 32 by Row 3, pull back and recount rather than correcting later, since the ribbed texture in later rows makes miscounts harder to spot.

Crochet a small gauge swatch before starting the full project; textured stitches can tighten the fabric, so adjusting hook size may help you achieve the intended drape and measurements.

Stitch-count checkpoints

Main Pattern · Row 2: 32 sts
Main Pattern · Row 4: 32 sts
Main Pattern · Row 6: 32 sts

If something looks wrong

The panel curls at the edges instead of lying flat.: Single crochet and double crochet rows pull fabric at different rates, which curls edges before blocking; wet-block the panel on a flat surface and pin until dry to flatten it.
The ribbed texture from the back-loop-only row barely shows.: Working into both loops instead of the back loop only flattens the ridge; check Row 5 (and the matching row in the Second Panel) and rework into the back loop only.
Stitch count drops below 32 partway through the rows.: A missed stitch at the turn is the usual cause; count stitches at the end of every row and use a stitch marker at row-end to catch the loss immediately.
The two panels end up different sizes.: Tension loosens as a maker works faster on the second panel; recheck hook size and swatch tension before starting the Second Panel so both match the 8 x 8 inch target.

Yarn substitutions

Cotton, medium weight #4	Produces a firmer, more structured panel with sharper stitch definition; keep the 5 mm hook, but expect a slightly smaller finished size unless an extra chain multiple of 2 is added.
Acrylic-cotton blend, medium weight #4	Keeps drape closer to the original while adding machine-washability; no hook change needed and yardage stays near 220 yards for the 8 x 8 inch size.
Wool or wool-blend, medium weight #4	Softens the ribbed texture and adds loft, which can enlarge the finished panel beyond 8 x 8 inches; size the hook down to 4.5 mm to compensate.

Original pattern: https://duniarecipe.com/korean-rice-scrub-recipe-for-all-skin-types-bright-glowing-skin-diy/

FAQs

Questions

Why does the pattern call for two identical panels instead of one?

The Second Panel repeats the Main Pattern instructions exactly, and the two pieces are joined during finishing. This panel-based construction keeps each piece small enough to control tension and width easily while crocheting.

Can the 8 x 8 inch size be changed?

Yes; the foundation row's 32 stitches can be adjusted in multiples of 2 to change width, and additional textured stitch sections can be repeated before finishing to change height. Both panels need the same adjustment to stay matched.

What happens if the back-loop-only row is skipped?

Skipping the back-loop-only row removes the ribbed texture that defines the fabric's surface. The piece will still hold its 32-stitch count and finished size, but it will look flat rather than textured.